HVACWARE.COM
 
 

Forums > Topics > Reply
   
Author Message
jagron2@comcast.net

new member

0 post(s)
posted on 4/27/2007

Hi,

I am new here but I hope I can find some help.

I have a Trane XL80 and up until last night it was working great.

Now I get no heat.

The status LED is blinking two time.

I can see the igniter lighting up, however no flame.

I Checked for voltage at the valve, I meter 24vac for about 2 seconds or about the same amout of time as the igniter is lit.

Any ideas?


 
 
Replies [ post reply ]
tammyngabe1@att.net

senior member

45 post(s)
replied on 4/27/2007

if you 24v at the gas valve and no gas you probably have a bad gas valve. let know if this helps. you should be able to hear the valve open.



All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum