HVACWARE.COM
 
 

Forums > Topics > Reply
   
Author Message
octavian8a@earthlink.net

new member

0 post(s)
posted on 3/26/2007
My split unit blower will not shut off with thermostat in 'off'.  I even disconnected the thermostat entirely.  Where do you get schematics for condensor/handler.  Do I have to write to the company, in this case Baker Distr.
 
 
Replies [ post reply ]
tammyngabe1@att.net

senior member

45 post(s)
replied on 3/27/2007

does everything else still work? because on some units when board goes bad fan will run continually. let me know


dkriparos@netzero.com

new member

1 post(s)
replied on 4/18/2007

I have the same exact problem. I replaced the control board and the problem did not go away. I've been told that the control board looks for input from a  LIMIT switch. All the limit switches seem to just open the 24VAC line. Have you solved your problem? How.

Thanks

 




All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum