HVACWARE.COM
 
 

Forums > Topics > Reply
   
Author Message
eng8818@hotmail.com

new member

0 post(s)
posted on 12/30/2006
Have been using a fine old unit for many years on nat gas. 65000 input btu. 52000 out. This unit was originally set up for propane and converted when nat gas became available to the area. Now wish to relocate it to the farm and need to change it back. Existing main jets (5) are .060 pilot is 80. I can make needed presure adjustments properly. Must have been lowered properly as it burns beautifully on Nat. Wish to keep the same great service this unit has been giving for the last 20 years. What well built,easily serviced and troublefree operation. Haven't even had to put a tc in it. Any help would be great.
 
 
Replies [ post reply ]
 [no replies]

All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum