HVACWARE.COM
 
 

Forums > Topics > Reply
   
Author Message
budman9696@comcast.net

new member

0 post(s)
posted on 11/2/2007
My ducane furnace wouldn't light after working fine last winter. I found the orifice that the vacuum hose plugs into on the heat exchanger was plugged. I cleaned it out & it fired right up. I hope this might help.  
 
 
Replies [ post reply ]
garrett.garris@pse.com

senior member

27 post(s)
replied on 11/7/2007

That is getting more common with these induced draft furnaces.


All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum