HVACWARE.COM
 
 

Forums > Topics > Reply
   
Author Message
klymatic@gmail.com

new member

0 post(s)
posted on 8/6/2007
I  just bought a new home and it came with a new furnance however I cannot get it to ingited or come on I have a concord 80 plus model and its plugged in and when I remove the door to the electrical everything looks fine my ac connected to it works but when I push the switch thats pushed down when the door is in place the lcd light blinks once red then pauses then blinks 9 times after that in the manuel its says something about the poarity being off is this an easy fix and if so can some one help me
 
 
Replies [ post reply ]
tammyngabe1@att.net

senior member

45 post(s)
replied on 8/10/2007

are the two wires that are on the back of the  switch match. if not they may have to be switched.any ?



All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum