HVACWARE.COM
 
 

Forums > Topics > Reply
   
Author Message
pswart@rsmas.miami.edu

new member

0 post(s)
posted on 8/5/2007

We needed to replace a Lennox air handler which was in the Ceiling with a smaller unit which would fit in a closet.  A Lennox would not fit so we had a Goodman installed.  Everything seemed fine except the installers were not familiar with the lennox 2 zone.  They seemed to have connected up the system incorrectedly as the replaced unit will not turn on the compressor and the compressor does not respond to that aur handler by switiching to high speed.  In fact the air handler is permanently on and only cools when the second air handler which was not replaced is on.

Obviously the Goodman unit was wired up incorrectly.  Any ideas?


 
 
Replies [ post reply ]
tammyngabe1@att.net

senior member

45 post(s)
replied on 8/10/2007

can you call them and have them correct the problem.



All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum