Forums > Topics > Reply
Author Message

new member

0 post(s)
posted on 3/3/2007

I have a GLUA60-E3A furnace and the manual reset limit control keeps tripping. What would cause it to do that?

Replies [ post reply ]

senior member

26 post(s)
replied on 3/6/2007

Possibilities include overgased, plugged heat exchanger, and, most likely, a cracked heat exchanger. You really need a qualified tech to do a proper inspection on this one. Good luck..............Gasman

All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum