Forums > Topics > Reply
Author Message

new member

0 post(s)
posted on 4/20/2009
I have a Carrier furnace model 58PB12510LA, I beleive the door switch is bad, it has a black wire, from the main, going to one terminal and a red wire & red/black wire both going to the other terminal. Can I wire around the switch to determine if that is the problem? If so would I just connect all the wires together?
Replies [ post reply ]
 [no replies]

All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum