Forums > Topics > Reply
Author Message

new member

0 post(s)
posted on 7/26/2007

Hello, I need help.  I have a goodman furnace.  The 3amp fuse blew, I replaced but blew again as soon as i flipped on the switch.  any ideas?

furnace model #  CAPF024A2A

thanks in advace

Replies [ post reply ]

senior member

45 post(s)
replied on 7/27/2007

you have short somewhere. make sure none of your low voltage wires are shorted. i hope this helps if not let me know.


new member

1 post(s)
replied on 7/30/2007

Yes, I agree 100%. There is a short directly to ground in your low voltage wiring. Try to disconnect power to the system and ohm out your thermostat wires to ground. Take Care.

All the comments are property of their posters.
Images, logos, content and data are copyright by HVACWARE.COM. All Rights Reserved.
HVACWARE.COM is not responsible or liability for any content.
CLICK Here for the Old HVACWARE Forum